Premier 10" Champion Series PRO Subwoofer with 2500 Watts Max.
Powerful design to deliver deep, impactful bass
Air Suspension System allows use in extremely small enclosures
Recommended Enclosure : 0.35 ~ 0.7 Cubic Feet
Introducing our new Premier® Champion Series PRO Subwoofers which feature an all-new design and look. Both subwoofers have a maximum power output of 2,500 watts. You now have a choice to select from either a Dual-Voice Coil 2-ohm or 4-ohm subwoofer:
TS-W2501D2: Dual 2 ohm, 4 Layer, Long Coil (1 ohm x or 4 ohm)
TS-W2501D4: Dual 4 ohm, 4 Layer, Long Coil (2 ohm x or 8 ohm)
The Premier TS-W2501D2/4 subwoofers are designed to produce enormously powerful music. Just take a look at its super-heavy-duty construction, all designed to handle up to 2,500 watts max. Double-stacked magnets for higher power, and a step-up radial surround for superior control and long excursions. We used a constructed cast-aluminum basket for this sub. Add in our patented IMPP cone and you've got a monster sub that can handle whatever you want to throw at it — including Pioneer's new breed of SPL amplifiers like the PRS-D1200SPL.
Air Suspension System
For its revolutionary 3.25 Inch deep Subwoofer, Pioneer created an air suspension system effective within a 70% smaller-than-previous enclosure that locks air for a spring-like effect between main and drive cones moving in unison. The result is consistently clear,powerful,wide ranging bass response. The subwoofer's dual cone structure maintains better sound linearity and reliability after hours of hard use than conventional subwoofers with "spider" structures to keep the voice coil aligned.
Double-Stack Magnet with Double-Stack Top Plate
To produce the tremendous magnetic energy we envisioned for this sub, we employed double-stacked magnets, weighing a hefty 85oz, and a double-stacked top plate above them. This design ensures positive, powerful control of the voice coil during those long excursions — and it's one reason you can ring up those high SPL numbers.
Wide-Roll 3-Layer Fiber Radial Surround
A sub's surround plays a key role in a speaker's performance. In order for bass response to be clear and tight, the surround has to respond evenly around its entire circumference without flexing or puckering, even at high volume levels. That's why Pioneer created a surround consisting of two layers of urethane with a layer of interwoven fiber between them. It's strong, stable, and it reduces distortion. In addition, the wider-than-normal design provides a long, linear excursion for excellent control and heavy-duty durability.
IMPP Cone with Carbon Fiber/Glass Fiber Reinforcement
Pioneer invented the process of injection-molding polypropylene to form a speaker cone. We call them IMPP cones, and they're exceptionally strong and lightweight. Now, we've reinforced IMPP with carbon and glass fiber, providing speaker cones with extraordinary strength and rigidity — and light weight. This is ideal for powerful, accurate music. And it gives the cones the durability needed for withstanding heat, humidity, and dust.
Cast Aluminum Basket
Designed from scratch by Pioneer, this one-piece aluminum basket assembly holds the motor assembly, cone, and magnet structure securely in place. The benefits of this design: reduced internal stress, superior damping, and increased magnetic efficiency.
Dual Voice Coil
TS-W2501D2/4 provides two voice coils, each either at dual 2 or dual 4 ohms. So you can use a low-impedance amp to produce much bigger, much more powerful bass. More options, more power: that's what DVC is all about. The Bridging Adapter is included for an easy Single Voice Coil hookup. It becomes a S
Add Newly Designed Spoke Grilles
We also recommend covering up your subwoofer with the UD-G257. This stylish spoke grille is a must add-on when building a system and gives the look of pure professionalism.
- Interlaced Carbon Fiber/Glass Fiber Reinforced
- Wide-Roll, 3-Layer Fiber Woven Radial with Honeycomb Cloth
- Dual 4-Layer, Long Voice Coil
- Phenol Resin Coated Glass Cloth
- Double Stacked (85oz)
- Aluminum Die-Cast Rigid Chassis
- 1-Piece Rubber
- Integrated Single-Sided Silver Compression Terminals
- 2500 Watts
- 800 Watts
- 18 Hz to 1000 Hz
- 87 dB
- D2: (1 or 4 ohm) D4: (2 or 8 ohm)
- 0.35 ~ 0.7 Cubic Feet
- 283.1 mm x 192.6 mm
- 169.2 mm