SGY-PMLTC

Power Meter Upgrade Kit for Consumer Supplied Left Crank Arms

  • Compatible with DURA-ACE R9100, 9000, ULTEGRA 6800, 105 (FC-5800), XTR Trail (FC-M9020), XT (FC-M8000), Cannondale Si and SiSL2, Campagnolo Potenza
  • No new crank arm investment needed
  • Ship existing left crank arm to Pioneer for factory installation and calibration
  • Pre-paid return shipment

Suggested Price$499.99 Buy Online

Single Leg Power Now Within Your Reach, Learn How

Add the Pioneer Power Meter to your existing Shimano crank

The SGY-PMLTC enables cyclists to ride with power in a few easy steps. Pack your left crank arm and ship it directly to Pioneer’s installation center where the advanced power meter technology is installed. Pioneer has a proven system performing the ship, install, and return procedure and facilitates a quick turn-around of the consumer’s crank arm with power meter. Throughout the entire process Pioneer keeps in constant communication.

Pioneer's Most Affordable Step Into Power Measurement

Now compatible with Shimano Dura-Ace R9100, 9000, Ultegra 6800, 105 (FC-5800), XT (FC-M8000), XTR Trail (FC-M9020), Cannondale Si and SiSL2, and Campagnolo Potenza crank arms, the SGY-PMLTC consumer kit requires no new investment in another crank arm. Power sensors are compatible with 165, 167.5, 170, 172.5, 177.5 and 180mm arm lengths and only adds 22 grams to your crank arm.

12 point force measurement for high accuracy and advanced metrics

Pioneer measures pedaling forces every 30˚, for 12 points of measurement per revolution. However, within those 12 points, Pioneer scans those pedaling forces an incredible 16 times, for an unbelievable 192 data points each rotation of the crank! This level of measurement is what leads to the accuracy of Pioneer power meters, as well as the basis for HDPower Metrics analysis.

Advanced HDPower Metrics further power and pedaling metrics analysis

Pioneer’s Cycle Computer unlocks the HDPower Metrics that allow riders to see Force Vector analysis, as well as Torque Vector and Pedaling Efficiency power metrics. These can be viewed on the Cycle Computer while riding, or in post-ride analysis using Pioneer’s free cloud-based Cyclo-Sphere software. Introduced over two years ago, these innovative features have not been matched by any of our competitors.

Compatible with ANT+ Cycle Computers

ANT+™ is a low-powered (2.4GHz range) wireless communications standard used by most cycle computer brands. The Pioneer Power Meter can easily pair with ANT+ compatible cycle computers and display power measurements that are available on that computer. For the full range of never-been-seen-before data including force vectors, torque vector, and other measurements, it must be paired with the Pioneer Cycle Computer.

A path for consumers to upgrade their system to a Dual Leg power meter system as they grow with their power analysis

Upgrade your analysis by adding a drive side upgrade kit, send in your existing crank to be upgraded to a Dual Leg system*. There is no better, or more detailed tool for analyzing power or pedaling balance metrics than a Dual Leg system, especially when combined with Pioneer’s HDPower Metrics.
* DuraAce 9000 and Ultegra 6800 drive side cranks only.

Race-tested, rider-perfected

The Pioneer Power Meter is built to perform in the toughest conditions. It was refined over a punishing season of racing through rain, snow, cobbles, mud and the thigh-burning climbs of the world’s most prestigious grand tours. It’s lightweight, fully-integrated design adds just 64 grams to your crank, measures up to 2,150 Watts @120 RPM, and is accurate to within +/- 2%. It can be easily calibrated for varying temperatures and elevations and is available in red and black transmitter caps.
- Hear from UHC Pro Cycling about their experience

Key Features
  • N/A
  • 165 / 167.5 / 170 / 172.5 / 175 / 177.5 / 180mm
  • N/A
  • 165 / 167.5 / 170 / 172.5 / 175 / 177.5 / 180mm
  • Left Only
  • Yes
  • For use with Pioneer Cycle Computers
  • For use with ANT+ Cycle Computers
  • Yes
  • +/- 2%
  • Yes
Pioneer Power Mode with Pioneer Computer
  • Left Only
  • Left Only
  • Left Only
  • Left Only
  • Left Only
  • Left Only
  • Left Only
  • Yes
  • Yes
ANT+ Power Mode with ANT+ Computer
  • Estimated
  • No
  • No
  • Yes
  • Yes
  • Yes
  • Yes
  • Yes
  • Yes
  • Yes
  • Yes
  • Yes
After Ride Analysis
  • Yes
  • Yes
  • Yes
  • Yes
  • Yes
Installation
  • Yes
  • x1
  • x1
  • Yes
  • Yes
  • 9mm
  • N/A
  • Yes
  • Yes
  • CR2032 x 1
  • 180 hours
  • 200g
  • 22g
  • N/A
  • 92.5 × 34.7 × 8.8
  • -10 to 50°C
  • 2 Years
  • Magnet (Patch x 1 & Arm type x 1), Magnet Spacer x 1, CR2032 Battery x 1, User’s Manual

 

Installation Videos