Premier PRS-Series 2-Channel Full-Range Class FD Amplifier

  • Variable Crossover (40~120Hz, HPF/LPF)
  • Selectable Bass Boost with Wired Bass Remote
  • Subsonic Filter (20Hz, 18dB/Octave)



CEA2006 Specifications:

  • 150 Watts x 2, at 4 ohms <= 1% THD+N
  • 600 Watts x 1, at 4 ohms BRIDGE <= 1% THD+N
  • 80 dBA Signal-to-Noise Ratio (Reference: 1 Watt Output)

Get Pure Sound using Pioneer PRS Amplifiers
The goal of a good amplifier is to cleanly amplify the music signal, free of distortion or added color. The Premier PRS-D2000T is a new generation of Class FD (Full-Range Class D) amplifiers that clearly achieves this goal. Using an exclusing designed ICEpower circuit, music comes through clear, crisp and detailed.

Energy Saving Design
A huge benefit is the Class FD design, which consumes far less current than traditional amplifier designs. This results in less draw on your vehicle's alternator, and could actually improve fuel mileage in many cases. It also allows for a compact chassis (heatsink) that takes up less space and provides more installation flexibility.

Variable Crossover (40~120Hz, HPF/LPF)
For added flexibility, the variable crossover lets you optimize your system's efficiency and delivers the best possible sound quality. You can adjust it continuously between 40 to 120Hz, as well as selecting from either High-Pass Filter (use for your main speakers) or Low-Pass Filter (use for your subwoofers), giving you the ultimate flexibility in setting up your system.

Amplifier Wired RemoteSelectable Bass Boost with Wired Bass Remote
So you're in the driver's seat going 65mph and you want to fine-tune the bass boost. But the amp's out of reach, way in the back. What are you supposed to do — pull over, get out, and run around to the trunk? That's why the PRS-D2000T comes with a wired bass remote. It's set at 50Hz, ideal for tuning in some more thump from your subwoofers. And because this is selectable bass boost, you can set the level at 0dB, 6dB, or 12dB, whichever sounds best to you.

Subsonic Filter
The subsonic filter lets you remove power-robbing frequencies below the tuning of your subwoofer/enclosure. The subsonic is set at 20Hz with a steep 18dB/Octave rolloff for optimal effect.

Speaker Level Inputs
What, you DON'T own a Pioneer headunit? Well, we won't hold it against you. In fact we'll even help you build onto your system. The PRS-D2000T's speaker level inputs allow you to connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) without having to buy add-on adapters.

PremierPremier® Two-Year Warranty
The warranty on this model is two years — double the warranty period of typical models currently on the market.

  • 1200 Watts
  • 2
  • 2~8 Ohm (Stereo), 4~8 Ohm (Stereo)
  • 150W x 2
  • 300W x 2
  • 600W x 1
  • 10Hz ~ 40kHz
  • 0.005%
  • 100 dB
  • 12" x 2-1/4" x 8"
  • 2/1
  • 2 Channel (Gold Plated)
  • Yes
  • Hi-Volt (400mV ~ 6.5V)
  • 2ch. HPF/LPF
  • 40~120Hz, -12dB/Oct.
  • 50Hz, 0/6/9/12dB, with Remote
  • 2 Year
CEA 2006 Specifications
  • 600 Watts x 1
  • 300 Watts x 2
  • 80 dBA
  • 150 Watts x 2