When I connect three or more USB devices, including the CDJ-400, to my computer, it quits outputting sound and stops working altogether?

When two CDJ-400 devices or one CDJ-400 and some other USB device are connected on the same bus, it may cause them to malfunction intermittently or to stop operating completely. When this happens, a message may appear and warn you of "Insufficient USB Bandwidth."

Disconnect one of the devices and plug it into a different USB bus and it should work normally. If your computer's USB bus is USB2.0, the devices will work normally if you connect the USB2.0 hub as shown in the figure below. In this configuration the parts that communicate with the CDJ-400 are in the USB1.1 bandwidith, but this ensures the communications between the PC-HUB are in the USB2.0 bandwidth.


Rate this Question/Answer

How well did this answer your question?

0% 25% 50% 75% 100%

If you have any otherfeedback on our FAQs, please provide it here. This form is intended for feedback only. We are unable to respond to questions submitted here. If you have a question or an inquiry, please contact us by Email.

Can't find your answer here? Try our Knowledgebase.