DJM-3000 Refurbished

19'' Rackmount Professional Mobile DJ Mixer - Save by buying Refurbished

  • Four Channel Layout
  • Onboard Fader Controlled Effects Including Echo, Zip and Roll
  • Send/Return




Pioneer refurbished products
  • Quality products at substantial savings 
  • Rigorously tested 
  • 90-day limited warranty covering parts and labor 
  • Contains all the originally packaged manuals and accessories 
  • Supplies are limited

Digital Output
Most mixers only have analog output, so this feature increases the options by allowing DJs to connect to a digital PA system, MD or DAT player, or any other device with digital input.

Effect Mix Mode
Easily and accurately effects phrases in a BPM-linked operation.

Effects Section

Produces repeat beat effect.

Repeated sounds that fade for echo effect.

Automatically switches sounds between left and right speakers.

Cuts sounds at requested beat.

Creates effects by manipulating sound frequencies.

Produces an electronic wave effect. Reverb: a range of reverberation effects.

A range of reverberation effects.

Pitch Shifter
Manipulates music pitch within +/- 1 octave.

Connects available peripherals (external effects input/output).

Beat Effects
Effects dial for complete control over effect intensity. Effects range enables sound effects on 1/4, 1/2, 1/1, 2/1, 4/1, 8/1 beats.

Auto BPM
Beat measurement, from 70-180 BPM.

Automatic synchronization between BPM and effect.

Beat Indicator shows when the required beat is linked to Auto BPM.

Additional Features

  • Adjustable Talk Over level control - mutes all levels apart from microphone.
  • Mic Switch (Mic Off/Mic On/Talk Over)
  • 7 Line Inputs
  • 4 Turntable Inputs
  • Switchable Phono/Line Inputs
  • 4 Fader Start Inputs
  • 3 Mic Inputs (1 x Neutric, 2 x 1/4 inch)
  • Headphone Monitor Split/Headphone auditioning
  • Recording outputs
  • Reinforced headphone jacks
  • Frequency Response of 20Hz-20kHz (CD)
  • Signal to Noise Ratio 87db (CD)
  • Total Harmonic Distortion Rate 0.02% or less (CD)

Optional Rotary Faders
Pioneer now gives the DJ the option to change the faders on the DJM-3000 to rotary faders (DJC-3000RV). The rotary fader option should be installed by a Pioneer approved service center

For more info, tips and tricks, demo videos and forums visit

General Power requirements AC 120V, 60 Hz
Power consumption 41 W
Weight 14.7 lbs.
Dimensions 19.3" (W) x 8.8" (D) x 4.3" (H)
Audio Section
Frequency response 20Hz to 20kHz (CD)
Signal-to-noise ratio 87 dB or more
Distortion Ratio 0.02% or less

Specifications and design are subject to possible modification without notice


Description File Size
DJM-3000 Operating Instructions 2,462 kb
DJM-3000 Rotary Kit Installation Guide 332 kb